44'' Gravely Commercial Sweeper

Arn’s offers a number of different services to maintain 44'' Gravely Commercial Sweeper. Click on the links listed or scroll down to see prices and what is included in each service.


Seasonal Concerns

We always ask customers what they’re doing with their sweeper and what sort of property it will be used on. The larger sweepers are ideal for commercial sidewalks and lots with less than four inches of snow.

While a sweeper can see year-round use, the majority are used for clearing snow. Like other winter equipment, extreme cold conditions over an extended period can cause motors and hydraulic drives to freeze up. Temperature starts to be a concern below -15°, and no manufacturer designs their product for extended use in bitter cold temperatures -30° and beyond. We recommend heated storage to give your sweeper a chance to thaw out and dry off.

In the very coldest conditions, hydrostatic drives and power take-off systems (PTO) may require a ten-minute warmup period.


44" Commercial Sweeper Maintenance

Naturally, frequency of maintenance will vary with type and amount of use. Your sweeper will need an oil change annually at minimum, possibly air filter, spark plug, and lubrication of drive line components.

Keeping your oil, oil filters, and air filters clean will do wonders for the longevity of your sweeper. These motors should have their oil replaced with every 100 hours of operation. This is the typical manufacturer’s recommendation, but if you’re operating in very dusty, dirty conditions, you would be wise to change the oil more often. During spring cleanup in particular, clients “in-the-know” change their oil around the 50-hour mark. 

It’s also wise when working in dusty conditions to keep a close eye on the condition of your air filters. This is an inexpensive part with a very important job. Inspect your air filters and give them a tap to shake loose accumulated debris. Don’t try to blow them clean; doing so actually makes them less effective. Check to be sure you can see light passing through the filter, and replace it if it fails this test.

A sweeper’s brush core is a consumable component whose life span will vary according to type and frequency of use. The large Gravely sweepers stay level regardless of the operating angle, so alternating that angle is not a consideration. However, keep an eye on your caster forks; if these become bent, it can lead to accelerated, uneven wear on the brush core.

Your operating manual will give you specifics; try and be one of the exceptional folks who actually reads it! You’ll do well to maintain a written log of your usage in order to keep your maintenance on schedule. 


Engine Oil Change$54.95

Work Performed: 

  • Change Oil
  • Change Oil Filter (if equipped)
  • 4 Point Visual Inspection
    1. Inspect or Replace Air Filter
    2. Inspect all Safety Controls
    3. Inspect all Operational Controls
    4. Inspect Tires or Wheels (adjust air pressure if required) 

*All parts, environmental fees, and shop supplies extra.
*If estimate given and work not performed, unit is returned unassembled.


> Return to Top

Change Transmission Oil$79.95

Work Performed: 

  • Drain Old Transmission Oil
  • Refill Transmission with New Oil
  • 4 Inspect for Oil Leaks

*All parts, environmental fees, and shop supplies extra.
*If estimate given and work not performed, unit is returned unassembled.


> Return to Top

Advanced Service$159.95

Work Performed: 

  • Change Oil
  • 4 Point Visual Inspection

    1. Inspect or Replace Air Filter
    2. Inspect all Safety Controls
    3. Inspect all Operational Controls
    4. Inspect Tires or Wheels (adjust air pressure if required)
  • Change Spark Plug
  • Change Fuel Filter (if equipped)
  • Check and Adjust Engine RPM
  • Adjust Carburetor (as required)
  • Load Test Battery
  • Inspect all Drive belts (if equipped)
  • Adjust all cables and controls (as required)
  • Inspect PTO (if applicable)
  • Measure Brush Core Wear

*All parts, environmental fees, and shop supplies extra.
*If estimate given and work not performed, unit is returned unassembled.


> Return to Top

Inspect Charging System$39.95

Work Performed: 

  • Inspect Battery and Connections
  • Load Test Battery
  • Test Regulator/Rectifier
  • Test Stator

*All parts, environmental fees, and shop supplies extra.
*If estimate given and work not performed, unit is returned unassembled.


> Return to Top

Bristle Replacement$199.95

Work Performed: 

  • Remove and Replace Brush Core

*All parts, environmental fees, and shop supplies extra.
*If estimate given and work not performed, unit is returned unassembled.


> Return to Top

Replace Drive Chain$69.95

Work Performed: 

  • Remove Chain Cover
  • Remove Chain
  • Remove Tension Block
  • Install New Chain
  • Install Tension Block
  • Re-install Chain Cover

*All parts, environmental fees, and shop supplies extra.
*If estimate given and work not performed, unit is returned unassembled.


> Return to Top